Learning Center

In heavy machinery, every detail matters. It's not just about the massive moving parts or the roaring engines; it's about those intricate touchpoints that enhance the operator's experience and boost the machine's lifespan.

Surprisingly, one of the most overlooked yet critical components is the seat. Think it doesn’t make much of a difference? Think again. Dive into these five tell-tale signs that might convince you to invest in seat covers for your heavy equipment—because sometimes, minor changes make the biggest impact.

1. Machines Have Lower Resale Value

When it’s time to part with that yellow iron, you want top dollar. We all do. So start with keeping that seat in tip-top shape. It's more than just a seat; it's your machine's first impression and can be super helpful for increasing your resale value. 

Visible Wear and Tear

Seats in heavy machinery aren’t just cushions but value indicators. When potential buyers see scuffed, torn, or worn-out seats, it instantly dings the perceived value of your equipment. It's as if those seat scars are tally marks, counting down the dollars from your machine's potential resale price. A roughed-up seat might imply otherwise, even if the machinery's guts work perfectly.

First Impressions Matter

Let’s keep it real, when folks first look at a piece of equipment. They're not digging into the engine first; they're checking out what's in plain sight. 

And where's the first place an operator is going to plant themselves? That's right, the seat. A well-maintained seat broadcasts care and diligence, suggesting that the rest of the machine has been treated equally. On the flip side, if that seat's seen better days, potential buyers might also assume the rest of the machine has.

Competing Equipment Looks Better

The heavy machinery market is like a bustling equipment beauty pageant, and let's just say machines with ragged interiors aren't winning any crowns. While your machinery might have the strength and power, it'll get left in the dust if it's not turning heads due to a worn-out interior, especially those seats. As buyers browse their options, they're naturally drawn to equipment that looks and feels good inside and out.

2. Operator Morale is Low

It's like lacing up worn-out work boots with holes in the soles for a double shift. You can still get the job done, but every step reminds you of the discomfort, and you can't help but wish for better. Like those boots, a busted excavator seat might not stop the work, but it sure makes the day feel much longer.

Morale isn't just about pep talks and pats on the back (although those are great). Sometimes, it's as simple as offering a clean, comfortable place to sit. Show your operators you value their hard work by valuing where they spend their working hours. 

Comfort Takes a Back Seat

Think about it — operators clock in hours, sometimes in grueling conditions, managing heavy machinery. Their seat is their throne, their cockpit, their control center. An uncovered, worn seat isn’t just uncomfortable; it's a daily grind on the backside and spirit. A lumpy, torn seat can make long shifts feel even longer. 

Pride in Equipment

The machine an operator uses is a reflection of them on the job site. No one wants to be the one navigating what looks like the "junker" of the fleet. Operators want to feel they're handling top-notch equipment, even if the machinery isn't new. When the machinery appears uncared for, especially right where they sit, it chips away at the pride they take in their work. 

3. Increased Machine Maintenance Costs

Regular Seat Repairs

It's like a broken record. The constant need to fix or replace uncovered seats becomes an ongoing chore. Each tear, split, or worn-out patch calls for attention, which means both downtime for the equipment and more money out of your pocket. The repetitive cycle not only takes a toll on your wallet but can be frustrating as heck for both you and the operators who have to wait around for repairs.

Imagine constantly slapping duct tape on a leaky pipe instead of just fixing it properly. That's what continual patch-up jobs feel like for machine seats. Sure, you're fixing the immediate problem, but it's a band-aid approach. Over time, those little fixes here and there stack up in costs. I

Investing in a solid solution—like a reliable seat cover—means breaking the cycle of "fix now, pay again later." Don't just put a lid on the issue; seal it shut for good.

Seat Replacement Costs

Replacing an excavator seat can cost anywhere from $550 to over $1000. That’s assuming you can install it in-house. Otherwise, it’s going to cost you more. Not to mention the downtime that the machine will experience.

Here are seat costs we’ve heard about from recent customers:

4. Machines are Declining Quicker

When an operator settles into a heavy machine with a worn-out seat, it subtly communicates that the machinery isn't valued. Just as a cluttered car suggests carelessness, a tattered seat can lead operators to assume the management isn't invested in the machine's upkeep.

Perception and Care

If the visible, intimate space like the seat appears neglected, it can influence operators to adopt a cavalier attitude toward the entire machine. Just like a clean desk can inspire productivity, a pristine seat can signify the machine's overall importance, fostering more careful use.

Setting Standards

A maintained seat isn't merely about comfort but stands as a representation of the machinery's value. When treated as a prized asset, operators are more inclined to handle equipment respectfully, reinforcing that the machinery is an asset worth preserving.

The Broken Window Theory

Much like the idea that visible signs of disorder and neglect can lead to more harm, a disregarded seat can suggest that other parts of the machine might be equally neglected. When the operator's direct interaction with the machine (ahem, the seat) shows wear, it might promote a lax approach to broader machine care, accelerating overall deterioration.

5. Your Brand Image Kind of Sucks

Your brand is more than a logo or catchy slogan; it's the total experience you provide, right down to the nitty-gritty details of your machinery. Just as a polished storefront draws more customers, pristine equipment conveys professionalism, signaling to clients and competitors that you're all about quality, inside and out. 

Heck, forget about clients and competitors for a second and consider what your seats say about your brand to your employees.

The state of your machinery, obvious elements like seats, sends a clear message about your company's values. Neglected seats can suggest a broader disregard for quality and detail in your operations.

Seats are indeed just one piece of the branding picture, but it’s a trickle effect. If you take care of your seats, your operators will handle the machine. The machines will look and run better, and so on. 

So…Do You Need Seat Covers?

Your heavy equipment is more than just metal and gears; it's the lifeblood of your operations, a symbol of your brand, and a direct reflection of your commitment to quality. When the seats are frayed, stained, or downright busted, it doesn't just affect the machine — it ripples out, impacting resale values, operator morale, maintenance costs, equipment lifespan, and your brand's reputation. 

We all know the drill: you check the engine, kick the tires (best of luck if you’re doing this with tracks), and if the price sounds right, you seal the deal. 

But when it comes to offloading your heavy equipment, there's much more to consider than just finding the person with the deepest pockets. Just like restoring an old car or tuning up a beloved guitar, boosting the resale value of your machine should be a badge of honor. It's a craft, a passion that transforms the task into an art form. 

Let’s get into the details of increasing that resale value when it’s time to sell.

1. Regular maintenance is a no-brainer

Heavy equipment isn't just a chunk of metal; it's an investment and the backbone of your operations. Treating these machines like an afterthought? That's like ignoring the lifeline of your business.  

Let’s dive in to grasp why routine care is the secret sauce to keeping these beasts running at their best.

Changing the oil 

Heavy machinery, just like small cars, needs its oil–it’s the bloodline that keeps the engine purring and the gears shifting smoothly.

We're all about that resale value, right? A well-maintained engine, proven with consistent oil changes, boosts the confidence of potential buyers. They'll be more willing to fork over more dollars if they know you've treated your equipment like the precious gem it is.

So, next time you try kicking that oil change down the road, remember: this isn't just a chore left for Grandma and her trusty sedan. It's the heartbeat of your heavy equipment. Show it some love, keep it running like a champ, and watch as it rewards you in performance and value.

The power of a maintenance log 

You know those folks who always seem prepared, the ones who have every tool they might need and know every bolt of their machinery by heart? That's what a maintenance log does for your heavy equipment. This isn't about just scribbling down notes; it's laying down the history of your machine's health and performance.

Clear, honest records build trust. When folks see that log, they'll know you're straight-shooting and that machine has been cared for. Without a log? They might just see an old piece of gear. But with it, they'll recognize a battle-hardened buddy that's stood by your side.

Logs also help spot problems before they sneak up on you, preventing those nasty surprises. And here's the kicker: a solid maintenance log doesn't just keep your machine running; it boosts its value big time. So, remember: machines might be mute, but their logs speak volumes. Keep them detailed and show the world your dedication.

2. Keeping that paint job shiny and new:

A worn-out, rusty exterior can quickly create an image of negligence or poor maintenance habits—even if that's far from the truth. Think of it as having food in your teeth on a first date; it's distracting and might overshadow all the good stuff you bring.

In the world of heavy machinery, first impressions are crucial. A gleaming exterior says a lot about your equipment. It conveys professionalism, attention to detail, and pride in one's work.

Consider a protective coating

But keeping that paint job pristine isn't just about aesthetics. It’s also about protection. Protective coatings act like a shield, warding off threats like rust, corrosion, and the usual wear and tear from the elements. These coatings extend the life of the paint, ensuring that the vibrant colors and sheen remain intact for longer periods.

A few reasons to consider one:

• Longevity: The longer your equipment looks new, the longer it can maintain a higher resale value.
• Protection: It's not just about looks. Protective coatings can prevent minor damages from escalating into significant repair issues.
• Cost-Effective: Investing in an excellent protective coating can save you from frequent repaint jobs, ultimately saving you money in the long run.
• Enhanced Image: Let's face it, a machine that looks well-taken care of tends to command more respect and trust, both in its efficiency and in the crew that operates it.

While the inner workings of your machinery are vital, it's clear that the exterior should be noticed. Think of it as a two-fold strategy: It’s not just keeping your equipment looking dapper; it’s about ensuring longevity, preserving value, and exuding professionalism at every step.

3. Upgrade old parts

In a world that's constantly evolving with technology and innovation, staying up-to-date isn't just about keeping up with the Joneses; it's about ensuring that your heavy machinery functions optimally and remains relevant in the market. Here's why updating those aging parts is not just a smart choice but a necessary one.

Replacing worn-out components

Upgrading old, worn-out parts is more than just giving your machinery a facelift. Think safety and efficiency: newer components, built with the latest tech, can ramp up performance, from fuel economy to reduced maintenance. 

This isn't like holding onto a vintage baseball card; in the world of heavy machinery, top-notch performance, and reliability reign supreme. By swapping out the old with the new, you're extending the machine's working life and making it a hot ticket item for potential buyers. In a game where top-tier is the goal, you don’t want to be left behind because of outdated parts. Stay ahead, upgrade, and ensure your machine is always market-ready.

Document upgrades

Whenever you make upgrades, you’ll want to document that too. It offers potential buyers a clear roadmap of the machine's history and the enhancements made.

Since many upgraded parts come with warranties, documenting them ensures you can use these benefits if needed. Check to see if the warranty is transferable to any new owners.

Upgrading old parts is a strategic move that ensures safety, efficiency, and relevancy in an ever-evolving market. Paired with meticulous documentation, these upgrades can significantly elevate the machinery's value and appeal, making it a prime choice for potential buyers.

4. Record all repairs, part replacements, warranty info, and maintenance

We’ve said this a ton already, but that’s because it will be a huge selling factor for your heavy equipment. Trust is good, but the paperwork is proof. And our future buyer's peace of mind is worth can drive a sale.

In the world of heavy machinery, a well-documented record is almost as important as the machinery itself. Every repair, part replacement, and routine maintenance session talks about the machine's history and overall care. Think of it as a machine's health diary. 

And if you had a warranty on the equipment, call and see if it's still valid and transferable. If it is, make that info available to potential buyers.

This way, anyone looking to buy knows exactly what they're getting into — no tricks, no gimmicks. That trusty logbook proves you've taken good care of your equipment, and in the end, that's gonna put more dollars in your pocket when it's time to sell.

5. Put seat covers on your equipment ASAP

Okay, you knew we were going to throw this one in here. You probably saw it coming a mile away, but that doesn’t mean it isn’t true.

You wouldn't head out into a rainstorm without a proper jacket, right? The same principle applies to the seats of your heavy machinery. They face a daily storm of dirt, sweat, wear, and the occasional coffee spill. Protecting them isn't just about aesthetics (okay, but there’s some of that)—it's about smart, long-term investment. Heck, even if you don’t pick our seat covers, there are other options out there.

Let's go over why seat covers are the jacket your equipment needs.

1. The daily grind

Every day on the job site brings its own set of challenges. Whether hopping on and off the machine with dirt-caked work boots, the rough materials of utility belts, or the accidental drop of a heavy tool—your seat is right there in the line of fire. Without a protective barrier, even the sturdiest seats can start showing signs of wear and tear in no time.

2. Upholding the resale value

We all know that first impressions count. When you decide to sell your equipment, potential buyers will judge it based on appearance. A brand new seat speaks volumes about how the entire machine was treated. It suggests careful handling and regular maintenance. In a nutshell, a pristine seat can significantly boost resale value.

3. Maintenance costs

While the initial investment in a high-quality seat cover might seem like an extra expense, it can save you heaps in the long run. Reupholstering or replacing a seat can cost around $1,000. Preventative measures, like a durable seat cover, can steer you clear of these costs.

4. Comfort and morale

Let's not forget about the opeartor! A seat cover can add an extra layer of comfort. Over time, this can greatly affect the operator's overall job satisfaction. We're talking fewer aches and pains and a happier team member. Plus, when you get into the cab of an excavator and the seat is still in good condition, that just makes the whole experience better.

5. Easy cleaning

Mud, grease, or that sandwich that decided to explode? No worries! A good seat cover makes clean-up easier. Instead of a lengthy scrubbing session, you could look at a simple wipe-down.

6. Representing brand image

Your equipment isn't just a tool—it represents your brand, commitment to quality and professionalism. Protecting its seats showcases a level of meticulous care and attention to detail. It's a subtle message to clients, partners, and competitors that you're serious about your work.

"Bought this Seat cover for my New JD 50 excavator which was my first new machine, and wanted to protect it. I must say the seat cover is the best I have seen and used in any equipment I have operated. Best aftermarket purchase I have made for my machine."

- Bow

Seat covers might seem small, but they pack a punch in terms of benefits and cost a fraction of what a new seat would. They're the unsung heroes, taking on the daily challenges of the construction world to ensure your equipment remains in prime condition, inside and out.

6. Expert inspections are worth their weight in gold

While you might know your equipment like the back of your hand, prospective buyers or partners don't. They're about to make a significant investment and want to ensure they make the right choice. This is where the invaluable role of expert inspections comes into play.

Why getting a professional to give your equipment the green light increases buyer confidence:

• Objective assessment: While you might offer the best descriptions and assurances, a third-party, especially an expert, brings an unbiased lens. Their evaluation is based purely on the equipment's condition and performance, free from emotional or investment bias.
• Spotting hidden issues: Even with regular maintenance, there might be underlying issues that aren't immediately apparent. Professionals identify these problems, ensuring the equipment is in top shape or pointing out areas needing attention.
• Boosted credibility: In the buyer's eyes, going the extra mile to get an expert evaluation showcases responsibility. It demonstrates that you're committed to transparency and ensures the equipment's quality.

The power of a stamp of approval:

• Reinforcing claims: You can sing praises about your equipment all day, but an expert's confirmation is concrete evidence to back up those claims.
• Increasing resale value: Expert-verified machinery often fetches a higher price in the market. The stamp of approval can sometimes make a tangible difference in the valuation.
• Peace of mind for both parties: While you're confident in your equipment's condition, an expert's nod gives you and the buyer peace of mind. It reaffirms your beliefs and soothes any reservations the buyer might have.
• Building trust: Being willing to bring in an expert to inspect the machinery shows prospective buyers that you have nothing to hide. It establishes a foundation of trust, which can be crucial in facilitating smoother transactions.

While there's an undeniable value in personal assurance and regular maintenance logs, an expert's stamp of approval can elevate your equipment's standing in the market. It's like having a trusted mechanic vouch for a used car—it just makes the whole deal sweeter for everyone involved.

7. Offer a training session with the sale:

You might draw the line here, but passing on heavy machinery is more than just tossing over some keys. Every machine's got its unique heartbeat, its quirks, and those "learned the hard way" lessons. 

You've put in the hours, learned its strengths, and discovered those sneaky little nuances that aren’t in any manual. Giving the new owner a crash course isn't just a nice gesture; it's about safety, efficiency, and a bit of that blue-collar camaraderie. It’s ensuring they get the job done right and safely while also passing on the know-how to keep that machinery running smoothly for the long haul. After all, the best lessons aren’t found in a book but from one hardworking hand to another.

8. Keep it clean

Machines are dirty. That’s why we love them. They tackle challenging terrains, bear massive weight, and endure the harsh realities of a construction site. However, it's essential to separate the workhorse from the mud it's trotted through when it's showtime. 

Here’s what a dirty machine can do:

• First Impressions Matter: Just as we judge a book by its cover, the exterior cleanliness of a machine is often the first point of evaluation for potential buyers. A mud-caked dozer might hint at neglect, even if it runs perfectly.
• Spotting Issues: Excessive dirt and grime can obscure actual problems or damages. Rust spots, leaks, or wear and tear might hide under layers of dirt. Presenting a clean machine ensures transparency and assures the buyer that there aren't underlying issues hiding.
• Reflects Maintenance Habits: While dirt is okay after a day's work, a clean post-operation machine suggests meticulous care and routine maintenance. It gives a glimpse into the machine's overall treatment during its lifespan.

And here’s what a little cleaning can offer:

• Boosts Aesthetic Appeal: Let's be honest; a sparkling machine just looks better. It's more inviting, appears newer, and exudes professionalism.
• Highlights Quality: When a machine is clean, it's easier to showcase its features, the quality of its parts, and any upgrades or modifications. Essentially, cleaning lets the machinery's quality shine through.
• Potential Buyers Appreciate the Effort: It might seem like a small gesture, but cleaning your equipment before a sale presentation sends a clear message: you value and respect the buyer's time and consideration. It shows that you're serious about the sale and have put in the effort to present the machine in its best light.

The construction site is a playground for these mechanical beasts, but when it’s time to sell, it's essential to scrub away the playground memories. Cleanliness, in this context, isn't just about aesthetics; it's a reflection of care, attention to detail, and professionalism. It solidifies trust, reaffirms value, and can significantly influence a potential buyer's decision.

It's about more than profit

When it comes to heavy equipment, resale value isn't just about counting pennies and dimes—it's a reflection of the blood, sweat, and respect you've poured into that machinery. 

By taking care of your gear, you're not just boosting its worth, but also passing on a legacy of dedication and hard work to the next proud owner. And hey, while you're thinking about giving your machine that extra TLC, why not start with the seat it rides on? After all, taking pride in your machine means making sure the next person in line feels the same way.

We’re dog people. I mean, we’re Americans, after all. At TigerTough, we have dogs who ride along in our trucks just like our customers do, so wondering if our seat covers are durable enough to withstand dogs is a valid concern.

If you’re bringing your pets along for the ride, first, you want to protect your seats. You paid good money for your vehicle and want to keep that resale value. We get that. So you need seat covers. Second, you want those covers to withstand what your pet dishes out.

Our covers aren’t made for dogs. And we don’t have any pet hammocks you see slung in the back seat of a Subaru near you. We make our covers for hardworking men and women, so let’s see how TigerTough holds up to pets.

Made for Messes

Dogs are gross. They run through mud, jump in swamps, and roll in...stuff. You need seat covers durable enough to handle the messiest scenario your dog finds itself in.

Waterproof material

Our covers are made from 1000-Denier CORDURA®. We’ve literally dumped tar on our seat covers and poured five gallons of coffee on them, and the seats underneath came out unscathed. So if your pooch soils your seat and you’ve got a TigerTough seat cover on it, don’t sweat. The seat under it will be fine.

“Tough as f###ing nails, my dog puked on them and didn’t even faze them. If they ever wear out, I’ll buy [them] again.”

-Gene

How well does dog hair clean up?

Sadly, our seat covers don’t repel dog hair. We’re actually not sure of any covers on the market that do. 

But we’re happy to report that dog hair easily vacuums up off the seat covers. We tested three tools to remove dog hair from the seat covers a standard vacuum cleaner, a Lily Brush, and a Furz-Off Stone. Out of all of them, the vacuum performed the best, and the fur came right off. You won’t need special tools.

Worst case scenario, you can easily remove the seat covers and toss them in the washing machine for ultimate cleanup.

“The best thing about these for me is their resistance to dog hair and ease of cleaning when they get dirty. I've got two large labs that wreck everything they touch. [A] damp cloth and good to go. Dog hair doesn't porcupine quill into the fabric. It vacuums right up. One dog has coarse hair, and the other soft. So well worth the money. So much better than the Carhartt I've used for the last 20 years.”

- Mark

 

Durability

We have yet to find a dog who can dig or chew its way through one of our seat covers. We can’t say it won’t happen, but until (if) it does, we’re considering them scratch-proof. No matter how much your dog digs, it won’t be able to dig through the cover. Heck, if a screwdriver can’t stab through a cover, we don’t think your dog has a chance of destroying these.

“We bought these well over a year ago mainly for our three dogs, and they look just like the day we put them on, so easy to clean too. We love them."

- Dennis

Safety

If your dog uses a dog seatbelt or harness, you can still clip it in. All connection points and seatbelts are still accessible with TigerTough. 

Disclaimer: We’ve only tested our seat covers for human safety, not dog safety, so be sure to read any instructions that come with your dog's car seatbelt before using it with TigerTough seat covers.

Dog-Friendly Seat Covers

We don’t make our seat covers with dogs in mind. Our covers fit like a glove on your captain/bucket seats and bench seats. We don't make pet hammocks or cargo liners (but if you are looking for cargo liners, we recommend Canvasback.) We make our seat covers for people first, but our covers are great for pets too. 

If our covers can withstand concrete, coffee, gypsum, chainsaws, and weed-eaters, they can withstand the wear and tear of dogs and whatever other animals you happen to have riding shotgun.

But suppose your dog manages to dig with the ferocity of a first-time excavator operator and actually causes some damage. In that case, we have a two-year unconditional warranty and will happily replace those covers. And yes, we mean unconditional.

“Absolutely fantastic product! Holds up great to a German Shepard Service Dog getting into and out of the truck multiple times a day now for months with no signs of wear. Cleans easily, including the famous “German Shedder” glitter! My wife loves it. She can access the storage compartments in the back seats with no problems and loves the fact that this seat cover even allows her to raise the one section of the back seat allowing the dog to get in and out easier. No other seat cover does that, well none that we found! It is just the best!”

- David

We've seen our seat covers in action with a range of dogs—hunting dogs, pets, police K9s, and service dogs. Not a single negative review about TigerTough seat covers for dogs has come our way. Even though our seat covers aren’t designed for dogs, they've proven to be as dog-friendly as the best of them.

Some of us need to read a million reviews and exhaust all the options before pulling the trigger to buy a product. If you're that kind of person, we totally get it. You want all the info before you make the decision. 

Here are some top questions we get from customers before they order:

What color should I get?

When picking your color, consider the color of the dirt and dust that you usually deal with. Is it light? Is it dark? Black will hide more of the darker oil and grease. Gray is best for light-colored dust like drywall dust. Hunt much? Then maybe you'll go the camo route.

If you're not concerned about dirt, then first of all, we're jealous, but secondly, choose whatever color you'd like! We don't have anything flashy, but we'll have a color in our nearly indestructible CORDURA that goes well with your interior. We have: black, gray, tan, western viper, urban viper, snow conceal, and drt.

Here are the patterns we have available:

Keep in mind that some seat covers (heavy trucks, transit vans, law enforcement vehicles, etc.) don't come in the camouflage options right now.

Are they safe with heated/cooled seats?

Yes, they are! They are perfectly safe to use with heated/cooled seats. You won’t notice much of a difference with the heated seats. With the cooled seats, the cover will restrict most of the airflow.

Are they safe with my airbags?

Yes! If your airbag deploys (and we hope it doesn’t ), the cover will not restrict it. A lab-tested tearaway will cover any airbags. 

We are proud to say our seat covers are safe with airbags.

How waterproof is waterproof?

Pretty waterproof. Water can’t get through the fabric, but a seam is perforated. All seams are perforated since sewing needles need to poke through the fabric to stitch the thread.

Look, you’re not gonna want to use them as a bucket if you can help it, but spills and liquid won’t penetrate the cover (remember it can get around the edges, though). We still recommend cleaning up liquid as quickly as possible.

There's a reason your mom always kept napkins in the car. It was to prepare you for this moment in life.

How long until I get them?

Our lead time varies. Check the product description or the top bar on the website to see when orders are shipping. Want to see if your item is in stock? Contact us to find out.

How long do they take to install?

If you’ve never installed a set of our covers before, we guesstimate about 30-45 minutes to put on a front bucket set. Make sure and watch the install video and read our installation expectations, and it will go as smoothly as possible for you!

But if you've ever stepped foot onto a job site, we have full confidence you can install a seat cover in your vehicle.

What’s the warranty?

All of our covers have at least a two-year unconditional warranty (HEAVY has lifetime warranty). Unconditional means… unconditional. The warranty only applies to the original owner, covering all physical damage to the cover, no matter how it happened. (If your covers are stained, that just means that they’re doing their job! Although stains can be minimized by cleaning up spills right away.)

How's TigerTough compare to WeatherTech or Carhartt?

Oh, we love this question! We have all sorts of respect for WeatherTech and Carhartt. And we want all of our customers to be informed, so we reviewed how WeatherTech compares to TigerTough and how Carhartt compares. It all comes down to what you want out of your seat covers.

We also reviewed the best seat covers for work trucks so that you can find the seat covers that work for you—even if they're not TigerTough.

Do they hold up to dogs?

Yes! Our seat covers are scratch-proof and mess-proof. They'll withstand whatever your dog dreams of doing to them. Although we don't make our covers with dogs in mind, our customers love how our durable our covers are when it comes to their dogs.

Are they actually made in the U.S.A.?

Heck yeah, they are! Once upon a time, we tried making covers in Mexico. Although they were fine in quality and comparable to the ones made on U.S. soil, we decided to make all of our seat covers under the stars and stripes of Old Glory.

Do you make seat covers for my minivan?

Sorry, but we don't. It's not that we don't love minivan drivers, but we specialize in making seat covers that support blue-collar industries. And we want to be good at what we do, so we focus on trucks and heavy equipment to make the best seat covers for our customers.

If you need more info...

If you have more questions, just contact us. We're regular people who love what we do, so we're happy to talk about seat covers all day long.

We didn’t know much about ShearComfort before doing our Best Work Truck Seat Covers review, but we were pleasantly surprised by their specs. In that review, we looked at their Waterproof covers made of 500 Denier CORDURA®. Since we wanted something more similar to our covers for this comparison, we ordered their CORDURA® 1000 Denier Xtra-Duty Seat Covers, which seemed promising.

Let’s see how they compare with TigerTough seat covers.

Watch the full video review

Packaging

The ShearComfort covers arrived in a plain, unbranded box with “custom seat covers” printed on it. If we were grading this, we wouldn’t ding points for an unbranded box, but they don’t get extra credit.

We were disappointed that their covers didn’t come with instructions. There wasn’t anything in the box except the covers. Maybe this was a packaging error, or perhaps it’s standard. Either way, since we work in the seat cover industry, we assumed we could figure out how to install them. Installing guides are available online, but we didn’t dig into them.

TigerTough covers ship in a branded bag, and we include full-color instructions for your specific vehicle. No generic instructions here. And all our instructions are available online (check out a copy) if yours mysteriously disappears.

Materials: What are they made of?

We got excited about ShearComfort because they, like us, use CORDURA®️, which is like the diamond-tipped saw blade of the seat cover world. These particular seat covers of theirs are made from 1000 Denier, the same as ours. (They have other types of CURDURA®️ as well.)

But there’s a plot twist.

ShearComfort’s covers aren’t fully covered in CORDURA®️. The back of the cover–where the pocket is–is made from stretchy nylon. Think 1980s workout gear–same vibe.

This was surprising because nowhere in the product description does it say the back is made from a different material. We can’t tell how this mullet-of-a-seatback will perform long-term, but we’ll get into more details in the installation section.

Design and Fit

The ShearComfort Xtra-Duty covers come in three pieces. We love this–it means the cover will have a more accurate fit. 

We want to point out that the seat covers we ordered didn’t look exactly like the stock image. The cover we received didn’t have an airbag tag, and instead of a tearaway seam, it had a hole with a flap for the airbag. However, these were indicated as airbag-compatible, so we’ll trust them. 

Overall, both covers look great installed.

Headrest

The ShearComfort covers have slits around the headrest mounts with a visible bias tape around the edge. Similar to how Carhartt does theirs. This doesn’t affect function; you wouldn’t notice this if you had the headrest down.

TigerTough covers are designed to fit under the plastic part of the headrest supports for a cleaner look.

Seatback

The part of the cover you rest your back on is similar on both brands. The TigerTough option you see has the added embroidery (which will cost you extra), but other than that, they’re about the same. We didn’t see an option to add embroidery to ShearComfort.

The actual backs of the seatbacks are very different. 

ShearComfort has a pocket, which is rare as a standard feature. You need to pay for this additional feature with the TigerTough vehicle covers (seatback pockets come standard on our heavy equipment seat covers, though.)

But, like we mentioned earlier, the material on the back of ShearComfort Xtra-Duty cover is a totally different material. It’s thin and stretchy. 

Here’s what we don’t know about this back material:

• What it’s made of
• How durable it is
• If it’s waterproof
• If it will stretch out with time

That said, we wish they would have wrapped the whole seat in the 1000 Denier CORDURA®️.

Side airbag-compatibility

ShearComfort deems their seat covers as side airbag-safe. This is huge. We wouldn’t ever recommend putting on a seat cover that wasn’t compatible with side airbags. 

This is where we got another head-tilt, though. 

The stock images of ShearComfort’s Xtra-Duty seat covers show a tearaway seam, similar to how TigerTough does it. But the covers we received from them had a hole covered by a flap for airbag deployment. Since the hole is smaller than the airbag deployment area on the factory seat, this does make us nervous. We couldn't find any testing info on their site, so we couldn't see how they deploy.

We emailed the ShearComfort team to see if their covers were tested. This is what they said:

"Yes all of our seat covers are made airbag compatible if the vehicle has side impact airbags...While I cannot send [the] documentation as it is proprietary information (every company has different methods that need to be certified), but I can assure you that there is regulation and tested and our manufacturing is certified."

TigerTough seat covers have a tearaway seam, so the side airbags can fully deploy in a collision. A third-party lab tests our covers for compatibility.

Here's one of the testing videos:

Seat crease

Both brands are similar here too. You can tell ShearComfort is a bit stiffer in this area, but we think that would break in with time.

Since each cover is made of three pieces (the headrest, seatback, and seat bottom), there will be a clean seat crease. 

Seat bottom

Both covers allow access to the seat controls and tuck in nicely on the side.

An elastic bungee connects on the side and runs under the seat to secure the ShearComfort covers. This helps keep it in place. Sort of. Elastic gives, so the cover may shift slightly when you slide into the seat. It’s also not a great material to use on seat covers because it stretches out over time, and if your vehicle gets hot at all, that will reduce the lifespan of the elastic. 

TigerTough uses a string that runs along the edge of the seat bottom and cinches up (like your favorite drawstring pants), runs under the seat bottom, and our Stringlock secures it all. It’s not the easiest, but it’s the best way to keep the seat bottom from shifting.

Keeping the cover secure on the seat bottom is a common problem with seat covers, and not many brands have figured out how to solve this effectively.

Ease of Installation

“That install kind of sucked,” admitted one of our team members. 

Since we didn’t receive installation instructions with the seat covers, we just went for it, assuming we’d figure it out. The headrest and seatback were fine, but it got rough with the seat bottom. We didn’t know what to hook the hooks to (Part of the seat? Each other?). This is partly on us because we didn’t search online for installation instructions.

And because we knew the airbag slot needed to be on the side of the seat closest to the door, we could figure out which cover to put on which seat. But it wasn’t indicated on the seat covers themselves. That box wasn't checked on ours:

Overall, the installation took seven minutes, which is still less than TigerTough seat cover installation, which was at nine minutes.

Warranty

ShearComfort has a two-year, risk-free warranty, according to their site:

“This product comes with a 2 Year Risk-Free Warranty against any defects in workmanship and materials. This warranty excludes daily wear and tear, accidental damage, or wear because of improper use or installation.”

Two years is better than we’ve seen from other seat cover companies, but we don’t love that it doesn’t cover daily wear and tear. If a seat cover breaks down during daily wear and tear, it's probably not one you want in a work truck.

The TigerTough warranty is two years, but we make our covers for the blue collar world, and they’re designed to power through the worst of scenarios, so we’ve made it an unconditional warranty. We don’t care how you wrecked your seat covers; we’ll repair or replace them for you.

Price

We used a 2023 Ford F150 as our test model for pricing.

ShearComfort CORDURA® 1000 Denier Xtra-Duty Seat Covers: $470
TigerTough Seat Covers: $297

The ShearComfort option is nearly twice as much as the TigerTough version. However, you can usually find a coupon code for ShearComfort or wait for a sale. We keep things straightforward at TigerTough–we don’t have coupons or surprise sales. You get what you get.

Customer Reviews

With a 4.6-star rating and over 1,700 reviews, people really like ShearComfort’s covers. Ed P. says:

“This stuff is really tuff material, looked rough at first but it conformed decently over a short time. I have zero worries about my new trucks interior now. There are a couple small areas the seat cover did not cover. So be it.”

We have around 800 reviews, but we average a 4.9-star rating. This is what Stephen E. has to say:

“This is my second set of covers for my personal truck. Indestructible. Have purchased a set of front and Rear for a RAM truck in my Volunteer Fire Department. Are holding up well to the abuses that fire fighters put them through with the gear they wear.”

Summary

Ultimately, seat covers save you money, so they’re a wise investment, and you should take some time to research which ones you like best.

Both of these seat covers are well-loved by their reviewers. It all comes down to preference and what your budget looks like.

Based on the facts, TigerTough is a little more appealing since the price is about half of what ShearComfort charges, and the warranty is unconditional. But both covers are great options and will protect your seats for years.

To be direct, yes, airbag-compatible seat covers are considered safe if they allow the airbag to deploy in third-party testing.

But for those who want to know more details, this article is for you.

Airbags are relatively new in automobile history. They were heavily considered for passenger vehicles in the 1950s, according to The Rough Road to Airbags. The concept was brought to Chrystler, but they weren't interested. Ford and General Motors experimented with prototypes but couldn't mass-produce them. 

But it wasn't until 1990 that the first collision with two cars deploying airbags was recorded. Since then, airbags have saved over 50,000 lives.

So what are airbag-compatible seat covers, and why are they important?

What are airbag-compatible seat covers?

Seat covers are considered compatible airbags when holes or flaps allow the seat airbag to deploy. They're considered safe for installation.

When you install seat covers on a newer (2012+) vehicle, you're almost guaranteed to cover up an airbag in the side of your seat. If your seat cover doesn't allow the airbag to deploy, you will likely be smashing your head and upper body into the side of the vehicle in the event of a crash. That's not something fun to think about, but it's true.

Watch this video and see how the torso airbag in the seat works with the ceiling airbag to protect the driver from hitting the side of the vehicle:

That doesn't mean you shouldn't install seat covers on your vehicle. Just don't install cheap, universal-fit covers. But watch out; even well-known manufacturers don't always have airbag-safe covers.

If the seat cover doesn't mention anything about compatibility, and you see straps or anything covering the side airbag, it's probably best not to install it in your car, truck, van, or SUV.

Which brands of seat covers are compatible with airbags?

In our research, we've found the following top brands to be considered safe:

• Covercraft
• Wet Okole
• Canvasback
• ShearComfort
• TigerTough

We haven't looked to see if these brands (other than TigerTough) have been independently tested, but according to their websites, they're considered safe with airbags. We suggest you only install seat covers that are independently tested and verified for airbag compatibility by a qualified third-party laboratory.

So TigerTough seat covers are airbag-safe?

Yes.

TigerTough seat covers have been independently tested and verified by MGA Research Corporation in Troy, MI. Watch the airbag deploy in under 30 milliseconds in the testing video below:

Whether you're installing truck seat covers or if they're for your car or van, check and make sure that the cover will allow your airbag to deploy. You owe it to yourself and your passengers.

Why are they important?

When adding aftermarket parts to your vehicle, you need to ensure that you don't hinder any of the safety features of your truck, van, car, police vehicle, etc.

All vehicles today have airbags in the steering wheel and passenger side dash. Most vehicles come with them in the side of the seat back. Some cars have airbags in the A-pillar (by the dash), the B-pillar (by your head when you're in the seat), the ceiling, and other locations in the vehicle.

We HIGHLY recommend checking your owner's manual before modifying your vehicle's interior to ensure you aren't compromising your and your passengers' safety. And when you're ready to install seat covers, be sure they're compatible with your airbags.

It turns out the competition for the best seat covers for heavy equipment is pretty slim compared to work trucks. There aren’t a lot of manufacturers creating seat covers designed for big iron. In fact, only one makes customized covers for OEM seats.

The top brands (and pretty much only brands) we found are:

Ultra Seat
Jay’s Equipment
Construction Seats
TigerTough

We’ll give an overview of each one. And for price comparisons, we’ll use a Cat 312 excavator high-back seat.

Ultra Seat

Ultra Seat is, first and foremost, an aftermarket seat company. They make air suspension seats, harness seats, mechanical suspension seats, pedestal seats, pod seats, static seats, and semi-truck seats. 

They also make replacement parts for seats like foam, dampers, and lumbar parts. And not only do they take care of seats in the field, but they also specialize in seats for the office with their 24-hour office chairs.

Clearly, they live up to their name, and seats are their bread and butter.

But how are their seat covers? 

Ultra Seat provides covers for heavy equipment and semi-trucks. When it comes to heavy equipment, they have three types of covers: high back, medium back, and low back. 

You might think that three options for hundreds of different types of machines isn’t very robust. You’re right.

Here’s the deal, if you have one of their replacement seats or a Grammer seat (because Ultra Seats are very similar to Grammer), their covers should fit like a glove. But if you have an OEM seat, putting an Ultra Seat cover on will result in a sloppy fit. 

Highback seat price: $168

Pros

We love that the covers are made out of Cordura (not sure what kind of Cordura, though) and that they will fit really well on their own aftermarket seats. It's great that these come in multiple pieces (back, seat, and headrest when applicable). We also applaud their customer service for getting back to us within a few hours when we asked for clarification about the warranty. 

Cons

The reality is these covers won’t fit OEM seats well. There’s not much else negative about the company or its product.

Verdict

We like these covers, but only for Ultra Seat’s aftermarket seats. If you’re going to spend the money to protect your heavy equipment seats, go for a custom fit.

Jay’s Equipment

Jay’s Equipment also goes by Equipment Seat Covers. They specialize in one-size-fits-most seat covers for heavy equipment and semi-trucks. 

These covers aren’t designed to fit any particular seat. Jay’s offers nine different sizes that would fit most yellow iron and smaller machines. You’re encouraged to measure your seat and find the best cover. 

Covers are available in vinyl (we wouldn’t suggest that material for a seat cover…ever) or canvas.

Highback seat price: $89

Pros

It's affordable. This could be a great option if you don’t mind a seat cover to fit like that bad suit you only pull out for weddings and funerals. We like that they have nine options versus Ultra Seat’s three options. We also like that they only focus on seat covers. 

Cons

The fit is far from custom. Unlike Ultra Seats, these won’t fit like a glove on any seat. And they’re not meant to. We also don’t love the materials of the seat covers. The vinyl seems like it’s going to get hot and sticky. And canvas is strong, but it won’t withstand the abuse of a job site. On top of that, you only have 30 days to decide if you’d like to keep the seat covers. There’s no warranty after that.

Verdict

This one is a no from us. We like how simple the site is and appreciate how quick their customer service was in getting back to us, but these covers aren’t made of the tough stuff you need inside heavy equipment. We also wish they kept their social media current so that we could see more customer feedback. Ultimately, if you’re going to spend the money on cover, you may as well save your pennies and go for a more durable option. 

Construction Seats

Here’s another seat manufacturer and distributor that makes covers. Construction Seats also goes by the name K & M Manufacturing, and they’re a Minnesota-based company (we love that about them). 

Like Ultra Seat, these covers fit well on their own aftermarket seats but aren’t designed to hug OEM seats. The adjustable side laces make it a little easier to customize the fit, but you'll probably have some of the seat exposed.

Highback seat price: $132

Pros

The fabric these covers are made from will last. And if you’re getting a KM aftermarket seat, you’ll get a good fit. The covers will be durable and last you for years. Plus, they offer a one-year warranty on the covers, which is better than some other options.

Cons

If you don’t have a KM or Grammer seat, you might get a fit similar to a bunched-up sock in a work boot. Is it ideal? No. Will it work? Yes. 

Verdict

This is a more affordable option than Ultra Seats version, and we like that they’re made of durable 900-denier fabric. If you need an affordable option, we’d go with this one. 

TigerTough

TigerTough heavy equipment seat covers are meant to withstand the abuse of a construction site. On top of that, they’re customized to fit specific makes and models of heavy equipment. They cover most machines on a job site: backhoes, dozers, excavators, landfill compactors, motor graders, skid loaders (skid steers), telehandlers, and wheel loaders. 

We put our seat covers through torture tests to make sure they’ll hold up to whatever you throw, spill, squash, or scrape on them.

 We have a lifetime unconditional warranty on our heavy equipment covers. So if it doesn’t meet your expectations, we’ll take care of it. 

Cat 312 excavator seat price: $247

Pros

We stand behind our products like we stand behind blue collar industries, so you’ll get one heck of a seat cover. It’s a custom fit, so it’s 100% tailored to the seat you’ll put it on. No sloppy fits here.

Cons

These are the most expensive option on the list. We also custom-make all of our covers, so they’ll take a little longer to ship.

Verdict 

Being the only manufacturer on the market making custom seat covers for heavy equipment, we can’t deny that we’d be the best fit (physically) for your machines. But if budget is an issue, there might be a better option for you. However, protecting a seat is much cheaper than replacing a seat.

Summary

It’s difficult to review heavy equipment seat covers fairly when only one company (TigerTough) makes custom seat covers. We don’t expect to be alone in the market forever, but for now, we’re the frontrunner in protecting heavy equipment seats.

We also wanted to point out that the other companies don’t have reviews on their sites, so getting a feel for what people think is tough. 

When you’re shopping for seat covers, no matter the brand you’re looking at, make sure they are:

• Waterproof
• Easy to clean
• Airbag-compatible
• Have a great warranty and return policy
• Made in America

You need seat covers that will work hard in the elements you’re in. Don’t settle for one that won’t get the job done.